Parameterization; General Information; Diagnostic Overview - Bosch Rexroth IndraControl S67 Series Application Description

DOK-CONTRL-S67DO8M122A-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Outputs – 2.0 A (4×M12)
9

Parameterization

9.1

General Information

9.2

Diagnostic Overview

According to the field bus type, only certain parameters are available for pa‐
rameterization. For further information, refer to respective field bus coupler
manuals.
WARNING
When parameters are changed incorrectly, machine components can be in a
dangerous state and endanger personnel and machines. Before changing
the parameters, ensure that the machine components are in a safe and de‐
fined state and switch off the parent control. Ensure before commissioning
that no personnel is in the danger zone of the machine components.
When parameterizing with IndraWorks, set the operating settings of the S67-
DO8-M12-2A module, e.g. the response in case of error and the release of
diagnostic messages.
The operating settings are transmitted via parameter telegram to the S67-
DO8-M12-2A module operated at the S-BUS.
The S67-DO8-M12-2A module is parameterized in IndraWorks. Double-click
on the S67-DO8-M12-2A module in the Project Explorer to open the parame‐
terization interface in the workspace. The S67-DO8-M12-2A module is para‐
meterized offline. The offline mode enables the parameterization of a not yet
existing S67-DO8-M12-2A module. The set parameters are first saved in the
project. The parameter data is applied during the PLC program download.
The S67-DO8-M12-2A module supports module-comprehensive (global) and
channel-related diagnostics. The transmission of diagnostics can be enabled
and disabled. If a diagnostics is disabled, the display response of the LED(s)
signalizing the respective diagnostics, changes. For further information, refer
to chapter 10 "Diagnostics via LED Signals" on page
The diagnostic messages of the S67-DO8-M12-2A module are specified ac‐
cording to the following tables:
Bosch Rexroth AG
Changing parameters!
47.
43/69
Parameterization