Call Waiting - Snom D717 User Manual

D717 User Manual
When these prerequisites are met, the status of the monitored extension is indicated by the LED of the
function key:
◦ Blinking LED: Incoming call ringing. If the call is not answered, press the key to pick it up;
◦
LED glowing steadily: The monitored extension is busy (in call, dialing, etc.);
and by the idle display showing the call-monitor state.
◦
When your phone is idle, any ongoing activity on all extensions monitored by your phone will
be shown on the display. In the above example, "7788 > 7904" indicates that extension 7788 is
calling extension 7904; "7781 x 7793" indicates that 7781 is connected to 7793 and that 7781
is the caller, 7793 the callee.
◦
Press to close the Calls screen and return to the idle screen.

Call waiting

When you are in a call, another call coming in will be announced visually by the flashing call LED and
by the symbol appearing in the function key line (Fig. 1); it will also be announced acoustically
by a double beep. Call waiting can be restricted to visual or acoustic announcement only. In the
default setting, call waiting is enabled. See "Call waiting" on page 98 for the instructions on how to
change the setting.
When a call is waiting, you have the following options:
• Press the blinking line key of the call waiting to put your current call on hold and to accept the
second call (Fig. 1). This option is available only when there is a free line key available at the time
the call comes in.
Fig. 1
• Press the function key underneath
2); you will see the caller ID on-screen if it is being transmitted. With the waiting call on-screen:
◦
press to reject the call waiting. The caller will hear the busy signal.
◦
press to accept the waiting call (Fig. 3) and put your current call on hold. With the newly
connected call on-screen (Fig. 3), press
Fig. 2
(Fig. 1) to put the Call waiting screen on the display (Fig.
to put the newly held call on-screen (Fig. 4).
56
Using the Phone
Fig. 3