Using The Phone; Making Calls; Selecting Identity For Current Outgoing Call; Using Different Audio Devices - Snom D717 User Manual

D717 User Manual
U
sing the phone
This section describes the functions of the phone with the factory default settings. If your phone was
installed and/or set up by someone else, the default settings may have been changed. Please check
with that person or company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone's web interface.
The default setting is "Name Number". You can change the setting at Preferences > Appearance tab
> Interface elements section > setting Number Display Style by selecting a different option from the
drop-down list.
M
aking calls
See "Entering numerals, letters, special characters, and symbols" on page 24 for information on
input modes and entering letters, numerals, and special characters.

Selecting identity for current outgoing call

See "Identities/accounts" on page 87 on how to configure identities.
If more than one identity is shown on the display, the one on the white bar with the
white and green rings around the green circle is the outgoing identity for the call
and the number/name that will show on the callee's phone. Use the up or down
arrow on the navigation key to select another identity.

Using different audio devices

Handset

• Pick up the handset, enter the phone number, and press
• enter the phone number and pick up the handset.

Headset

Enter the phone number and press

Speakerphone

Enter the phone number and press

Handset or headset and casing speaker

With dual audio mode activated, other persons present in the room are allowed to listen in to the third
party over the phone's casing loudspeaker.
1. Use the method for handset or headset use to dial.
2. When the call has been established, press
turn the speaker off.
.
.
to enable the casing loudspeaker. Press
50
OR

Using the Phone

to