Troubleshooting; Reboot; Hard Reboot; Reset To Factory Values - Snom D717 User Manual

D717 User Manual
T
roubleshooting
R
eboot
1. Press .
2. Select Maintenance and press
3. Select Reboot and press
4. When asked whether to "Reboot?", press
5. Wait for the idle screen to reappear.
H
ard reboot
Disconnect the power, wait for 10 seconds, and reconnect. Wait for the idle screen to reappear.
Warning: Never disconnect the power during a firmware update!
R
eset to factory values
The phone can be reset to factory values in admin mode only.
Warning: All customized settings will be lost!
1. Press .
2. Select Maintenance and press
3. Select Reset values and press
4. Enter the administrator password and press
5. See "Initializing and registering the phone" on page 14 on how to continue.
T
FTP Update
When there is no other way to get the phone to work (administrator password lost, etc.). How it is
done: See http://wiki.snom.com/Firmware/Update/TFTP_Update.
Warning: All customized settings will be lost!
M
anual initialization
When automatic initialization via DHCP fails, enter the values for netmask, IP gateway, and DNS
server manually after each prompt on the display.
.
.
.
.
.
.
105

Troubleshooting