Snom D717 User Manual page 71

D717 User Manual
other module of the same type is connected to the phone. They are not visible on the function
keys page when no expansion module is connected.
Settings descriptions:
◦ Context
This setting specifies which configured identity will be used when executing the functionality
of the key. You may want to use this feature when you have accounts with different providers
or when you wish to present different identities to certain destinations.
For example: If you have programmed key P2 to speed dial a specific number and you want to
use configured identity 2 to call that number, select configured identity 2 from the drop-down
menu of P2's "Context". When you speed dial the number by pressing key P2, identity 2 will be
used as the outgoing identity.
The default setting is "Active", which means that the identity selected as the phone's outgoing
identity at any given time will be used.
◦
Type
Select the type of functionality from the drop-down list. See "Appendix 4 - Programmable
Functions" on page 115 for more information. If you select "Key Event", a drop-down list with
the available key events will replace the text field under "Number". The default setting is "line".
◦
Number
Enter one phone number or value for the function or, if the function is key event, select an
event from the drop-down list. Enter phone numbers exactly the way they need to be dialed,
i.e, type the number without spaces or punctuation marks between the digits. For example, a
number with an area code that might conventionally be notated as (617) 555-0704 should be
entered as 6175550704.
◦
Short/Full Label Mode (phone)
Select a mode from the list (see Fig. 3 and 4 on page 28). The default settings for both are
icon and text.
-
Icon. The label will display the icon of the functionality mapped onto the key, e.g.,
, if extension;
-
Text. The label will display the text you have entered in step 10 of "Function key settings
on the phone" on page 72 or the number if no text was entered.
-
Icon and text. The label will display the icon of the functionality mapped onto the key and
the text or number.
◦
Short/Full Label (phone), Label (D7 expansion module)
Optional: Enter a name or other descriptive text in the text field. This is the data displayed on
the key's label area on the phone and on the D7's display, respectively. If you leave the field
blank, the number will be displayed in the key label area.
◦
LP Feature (functionality for long-pressing key)
This feature can be set on the phone only, not on its web interface. It is a shortcut to the
configuration menu of each SmartLabel key with LED
setting, the function is enabled (Fig. 1).
Press the key for three seconds to open its configuration menu. The yellow LED on the key
blinks. See "SmartLabel keys" on page 75, step 4, on how to continue conigurating the key.
, if speed dial; etc.
71
Configuring the Function Keys
(keys P1–P3). In the default