Cleaning And Maintenance - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
9

CLEANING AND MAINTENANCE

Observe safety instructions in Chapter 4.
1. The spray gun and the unit must be cleaned and fl ushed daily. The cleaning agent
used for cleaning must be suitable for the coating product.
2. Check hoses, pipes, and couplings every day and replace if necessary.
In accordance with the guideline for liquid ejection devices (ZH 1/406 and BGR 500
Part 2 Chapter 2.36):
- The liquid ejection devices should be checked by an expert (e.g. Wagner service
technician) for their safe working conditions as required and at least every 12 months.
- If devices have been decommissioned, the examination can be suspended until the
next start-up.
Impurities in the spraying system!
Spray gun blockage, products harden in the spraying system.
Flush the spray gun and paint supply with a suitable cleaning agent.
Flushing agent in the air duct!
Functional faults caused by swollen seals.
Never immerse the spray gun in cleaning agent.
Incorrect maintenance/repair!
Risk of injury and equipment damage.
ORDER NUMBER DOC 2312956
NOTICE
NOTICE
WARNING
Have repairs and part replacements be carried out only by
specially trained staff or a WAGNER service center.
Before all work on the device and in the event of work interruptions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun against actuation.
Observe the operating manual and service instructions at all
times when carrying out work.
39