General Safety Instructions; Safety Instructions For The Operator; Electrical Equipment; Staff Qualifications - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
4

GENERAL SAFETY INSTRUCTIONS

4.1

SAFETY INSTRUCTIONS FOR THE OPERATOR

Keep this operating manual at hand near the unit at all times.
Always follow local regulations concerning occupational safety and accident
prevention.
4.1.1

ELECTRICAL EQUIPMENT

Electrical devices and equipment
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient infl uences.
May only be maintained by skilled electricians or under their supervision.
Must be operated in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Must be decommissioned if they pose a hazard.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work. Observe electrical safety regulations.
4.1.2

STAFF QUALIFICATIONS

Ensure that the device is operated and repaired only by trained persons.
4.1.3

SAFE WORK ENVIRONMENT

Make sure that the fl oor in the area where you are working is electrostatically conductive
in accordance with EN 61340-4-1.
Ensure that all persons within the working area wear electrostatically conductive shoes.
Ensure that during spraying, persons wear electrically conductive gloves. The grounding
takes place via the spray gun handle.
Paint mist extraction systems must be fi tted on site according to local regulations.
Ensure that the following components of a safe working environment are available:
– Product/air hoses adapted to the working pressure.
– Personal safety equipment (breathing and skin protection).
Ensure that there are no ignition sources such as naked fl ames, sparks, glowing wires,
or hot surfaces in the vicinity. Do not smoke.
ORDER NUMBER DOC 2312956
12