Functional Description; Design Of Spray Gun - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
5.4

FUNCTIONAL DESCRIPTION

5.4.1

DESIGN OF SPRAY GUN

A
F
I
G
B_03051
H
N
Designation
A Gun head
B Spray gun body
C Tension sleeve drive
D Base plate
E Atomizing air connection (blue)
F Union nut
G Air cap (blue, red or bronze)
H Nozzle
I Standard holder
J Connecting fi tting (product)
K Connecting fi tting (product)
L Connection for control air (red)
M Shaping air throttle
N Product channel lock pin
The device consists of a gun head (A), gun body (B), a drive (C) and a base plate (D). The
air cap (G), the appropriate nozzle (H) and various parts for sealing and fastening are
attached to the gun head (A). The product valve and packing are housed in the gun head
(A). The clamping mechanism for the packing is installed in the gun body (B). The gun body
also serves as a connecting piece between the drive (C) and the gun head (A). The drive
(C) consists a diaphragm and a pressure spring for the product valve. The base plate (D)
contains all connections (E, J, K) and a shaping air throttle (M). It can be used to connect
the gun to the corresponding reciprocator or gun holder.
ORDER NUMBER DOC 2312956
B
D
J
C
L
E
B_03052
K
M
24