Safety Parameters; Processible Products - WAGNER GA 4000ACIC-R Translation Of The Original Operating Manual

VERSION 06/2013
OPERATING MANUAL
2.4

SAFETY PARAMETERS

WAGNER accepts no liability for any damage arising from incorrect use.
Use the device only to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety fi xtures.
Use only WAGNER original spare parts and accessories.
The device may only be operated under the following conditions:
The operating staff have previously been trained on the basis of this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance, and repair information in this operating manual must
be observed.
The statutory requirements and accident prevention regulation standards in the
country of use must be observed.
2.5

PROCESSIBLE PRODUCTS

Top-coat paints, primer paints, corrosion protection, textured paints, lyes, staining solvents,
clear paints, separating agents, etc. with a solvent or water basis.
Note:
Please contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
ORDER NUMBER DOC 2312956
9