Datavideo KMU-200 Instruction Manual page 57

2. Click the Load File button to locate the KB file "RMC-500-CTRL_vx.xx.bin" on the local
hard disk.
3. Click the Burn button and the firmware upgrade process will begin.
4. The process is complete when the Progress Bar reaches 100% and the "Firmware Update
Success!" is displayed.
Touch Panel: KMU-200-PL_x.x.bin
1. On your laptop, open the KMU-200 Firmware Tool.
2. Click the Load File button to locate the firmware file "KMU-200-PL_x.x.bin" on the local
hard disk.
3. Click the Burn button and the firmware upgrade process will begin.
4. The process is complete when the Progress Bar reaches 100% and the "Firmware Update
Success!" is displayed.
I. Make sure the KMU-200 Firmware
Tool has detected the COM port to
which the KMU-200 is connected.
II. Select Touch Panel
57