Datavideo KMU-200 Instruction Manual page 56

DB: KMU-200_DB-vx.xx.bin
1. On your laptop, open the KMU-200 Firmware Tool.
2. Click the Load File button to locate the DB file "KMU-200_DB-vx.xx.bin" on the local hard
disk.
3. Click the Burn button.
4. Power cycle the KMU-200.
5. The firmware upgrade process will begin as soon as the KMU-200 is turned ON again.
6. The process is complete when the Progress Bar reaches 100% and the "Firmware Update
Success!" is displayed.
Keyboard: RMC-500-CTRL_vx.xx.bin
1. On your laptop, open the KMU-200 Firmware Tool.
I. Make sure the KMU-200 Firmware
Tool has detected the COM port to
which the KMU-200 is connected.
II. Select Sub (USB)
I. Make sure the KMU-200 Firmware
Tool has detected the COM port to
which the KMU-200 is connected.
II. Select KB (UART)
56