Four streaming protocols available on the NVS-31 MARK II are RTSP, RTMP, HLS, and TS. See
Section 5.3
for instructions on each individual stream setup.
Note that once your video streams are set up, click "Apply" button to apply the new stream
settings. Click "Start Stream" to open the stream and "Stop Stream" to end the stream. To
reset, simply click the default button.
Next, we will discuss the stream setting options in greater detail.
Encoder Source
This option allows you to enable the stream encoder for configurations of various
parameters. If the stream encoder is not needed, disable this option.
Stream Type
The NVS-31 MARK II offers the user four stream types which are RTSP, RTMP, TS, and HLS.
Parameters of each individual protocol will be briefly described below.
27