Datavideo KMU-200 Instruction Manual page 24

 Login the NVS-31 MARK II via a web browser.
-
Default user name is admin
-
Default password is 000000
 Click the "System" tab then on the system page, enter network settings such as static IP
and default gateway. Make sure that the default gateway matches your connected
network and no device shares the same IP as the NVS-31 MARK II.
For example, if your router's default gateway IP is 10.10.1.1, then in the default gateway
field, you should also enter 10.10.1.1. Then set the IP address of the NVS-31 MARK II to
10.10.1.X, which can range from 10.10.1.2 to 10.10.1.255. Pick an unused IP address.
 DHCP：Disable
 Static IP：X.X.X.Y；the first three decimal numbers must be the same as your router or
switch. The number Y must be a number not used by any devices connected to the
network.
 Subnet Mask：255.255.255.0
 Default Gateway：Z.Z.Z.Z；same as the gateway IP of your router or switch.
Note: Some router may require special gateway IP setting; instead of the standard
192.168.1.1. Therefore, you should check the network properties on the PC before
switching to the fixed IP mode.
For example, some routers have a gateway IP of 192.168.1.254 and as a result, the default
gateway and primary DNS fields on the NVS-31 MARK II must also be configured to
192.168.1.254.
 Primary DNS: Same as the default gateway IP, which, if causing issues, can be changed to
8.8.8.8 or 8.8.8.4 (Public DNS provided by Google).
 Click the "Submit" button to save the network settings.
 Reconnect the PC and the NVS-31 MARK II to the network.
 Restore the PC's original network settings.
 Shut down the KMU-200; wait for approximately five seconds before turning the KMU-
200 back ON.
 You should be able to access the NVS-31 MARK II through the fixed IP address.
24