Datavideo KMU-200 Instruction Manual page 13

Pan / Tilt Control
P/T Joystick
PAN – Move the joystick left or right to pan
the selected frame from left to right or vice
versa.
TILT – Move the joystick up or down to tilt the
selected frame up or down.
Note: Before attempting to use the joystick to
PAN or TILT the frame, first make sure the
PTZ LOCK button is not enabled. If the LOCK
button LED is ON, the joystick is locked; press
the LOCK button to unlock the joystick.
Scroll Wheel – ZOOM
ZOOM – Scroll up to zoom in and down to
zoom out.
Speed Selection Buttons (F/M/S)
The pan, tilt and zoom speed can be chosen
by pressing one of the three speed buttons on
the right of the scroll wheel.
Note: Make sure the LOCK button is not
enabled. If the LOCK button LED is ON, the
scroll wheel is locked; press the LOCK button
to unlock the scroll wheel.
LOCK Button
When enabled, the joystick and scroll wheel
will be in the lock state. To resume their
functional status, simply press the button
once to unlock.
Output Settings
L/S Buttons
The L button sets the channel frame size to
large and the S button sets the channel frame
size to small. The setting applies to all four
channels.
Vertical Button
Press the Vertical button to change the
output orientation (to vertical display) of all
four channels.
13