Before Using Infinea X; Developing Applications; Programmable Options; Box Contents - Infinite Peripherals Infinea X User Manual

Infinea X User Manual

Before Using Infinea X

• Remove the device and any included accessories from the shipping carton
and verify contents against your packing list.
• Retain all packing materials, invoice, and bill of lading. These may be
required to return the device for servicing later, or to process a claim with
the shipping carrier.
• Carefully inspect the contents inside of the packaging for any signs of
damage.
• If there are signs of damage, do not attempt to use the unit. Notify your
account executive or contact Infinite Peripherals technical support,
https://ipcmobile.com/support.
• Ensure the battery is fully charged.
• If the battery is fully discharged, the charging time is approximately 3
hours and 30 minutes.

Developing Applications

Software Developers Kit (SDK)
Software is not automatically provided with your Infinea X.
Integrating the Infinea X into your iOS application requires the use of
the Infinite Peripherals Universal SDK. The SDK incorporates an API
specifically for developing applications to use Infinea X functionality.
For additional details on using the Infinite Peripheral Universal SDK,
please refer to the appropriate SDK documentation. You can contact
your Infinite Peripherals account representative for Third-Party
software solutions.
For the latest Infinite Peripheral Universal SDK please visit our
developer portal:
developer.ipcmobile.com/

Programmable Options

Optional settings for the Infinea X are configured via the SDK
Option Description
Set Charging To enable/disable battery backup sharing capability to
charge the iOS device from the IX removable battery.
Charging Current Set to 500mA or 1A (default).
Scan Mode
• Single Scan: Single barcode by pressing the Scan
button.
• Multi-Scan: Multiple barcodes by pressing and
holding the Scan button.
• Motion-Detect: Scanner is activated
automatically when barcode is placed near the
barcode engine.
• Multi-Scan without Duplicates.
Pass Through Sync When enabled with USB cable plugged in, the iOS
device can be synced via a PC or MAC. Default is off.
iOS device does not charge when plugged into an
external charger.
Time Out Timeout is set for 60 up to 64800 seconds (18 hrs).
Default setting is subject to change based on specific
use or configuration.

Box Contents

Your Infinea X ships with these items.
Infinea X (1)
Standard Battery (1)
(inside)
Charging Cup (1)
Flat-head shoulder socket cap
T6 Torx screws (6)
Note:
Contents in your shipment and SKUs vary based on your order.
6