Elk Grove Village, IL 60007-5329 Charge Battery Charge Using Electrical Outlet Battery Disposal Toll-Free 800.278.7860 Sync With iTunes Office 847. 818.1260 Turn on the Infinea X DF Fax 847.818.1287 Scan barcodes Enable RFID/HID Reset Infinea X DF Troubleshooting Cleaning Guidelines Cleaning Precautions...
Legal Notice Box Contents • Before using your Infinea X DF, remove the unit and any included “Made for iPhone” means that an electronic accessory has been accessories from the shipping cartoon and verify the contents designed to connect specifically to the iOS device and has been certified against the packing list.
Getting Started Infinea X DF Features Infinea X DF allows you to scan barcodes into an iOS device. Before using the Infinea X DF, charge the battery fully. To get you up and running with your new unit, review these sections.
Infinea X DF User Manual Technical Specifications Mechanical Electrical Barcode Scanner Compatibility • 2D high-speed imager • iOS device 7 / 8 / SE • Supports all major 1D and 2 D barcodes • Dimensions Battery Capacity 164mm (L) x 83mm (W) x 27.7mm (H) (6.5in. (H) x 3.3in (W) x 1.1in (H) •...
Programmable Description Integrating the device into your application requires the use of options the Infinite Peripherals Universal SDK. The SDK incorporates an Set Charging Enables or disables battery backup sharing API specifically for developing applications to use with your unit’s capability to charge the iOS device from the IX functionality.
Be careful to not force the battery into place, if the latch is closed and locked. The Infinea X DF is molded specifically to the compatible iOS device. iOS Lower the battery pack into place so it seats flat when installed.
Charge Battery Charge Infinea X DF You can charge the Infinea X DF by either an AC wall outlet or by You can charge up to ten batteries at once using the multi-bay charger. replacing the battery. Pass-through charging to your iOS device is Each battery slot in a single LED charge.
Charge Using Electrical Outlet Insert the standard battery into the Infinea X DF, and then You can sync your iOS device with iTunes using the Infinea X DF. attach the charging cup to the bottom of the unit. When you hear a click the device is fully seated in the cup.
Turn on the Infinea X DF Reset Infinea X DF When the Infinea X DF is turned off or in sleep mode, press the scan/ You can do a soft-reset without removing your iOS device to cycle power button to turn it on. A single beep is heard indicating it’s ready through the power allowing the Infinea X DF to restart.
Reason Charging cup is connect to unit. General issues Partial or no Unreadable tag or card. iOS device does Infinea X DF is not configured to sync. data is returned Battery is low. not sync with during scan. iTunes. Faulty reader.
The Infinea X DF is certified to meet IP54 Ingress Protection Marking sterilize the Infinea X DF. per IEC 60529. Per the IP54 rating, the Infinea X DF is protected against • Do NOT soak or immerse in any liquid.
Servicing Infinite Peripherals does not warrant, and is not responsible for, any damage to the Infinea X DF (“Product”) or the assembled iOS device as a result of liquid or solid particle intrusion into the Product, or damaged Use the link in step 1 to create an account and gain access to our caused by dropping the Product with the assembled iOS device.
Infinea X DF User Manual Symbols Symbol Description Refer to the instructions before using. Manufacturer Manufacture Date Caution Serial Number Part Number Waste Electrical and Electric Equipment Complies with part 15 of the FCC rules Near-field communication (NFC)
Need help?
Do you have a question about the Infinea X DF and is the answer not in the manual?
Questions and answers