Infinite Peripherals Infinea X IX-I2DBTR-PH5-WH Quick Start Manual

INFINEA
*Also available in black
QUICK START GUIDE
ASSEMBLY
CAUTION: Please take care that the rubber bumper is properly aligned between the top and bottom covers. Failure to do so will compromise the liquid protection
features of the Infinea X. If you have any questions about installation of the rubber bumper, please contact your sales representative.
2
Open the Infinea X by loosening the
1
torx screws and gently flipping open
the top cover. Slide the iOS product
onto the Lightning ™ Connector and
audio jack until it clicks into place.
ABOUT YOUR INFINEA
9
4
8
X
®
1. FRONT SPEAKER
2. iOS ON/OFF BUTTON
3. SCAN BUTTON
4. STATUS LEDs
5. SPEAKER TOGGLE BUTTON
Close the top cover, being careful
not to pinch the wires, while
maintaining the position of the
protective rubber bumper.
Lightning™ Connector
Audio Jack
X
2
1
3
4
5
7 6
6. MICROPHONE
7. HOME BUTTON
8. BATTERY STATUS BUTTON
9. VOLUME BUTTONS
1
6
5
6.
1. iOS CAMERA OPENING
2. BARCODE SCANNER
3. RFID ANTENNA
4. BATTERY PACK
5. BATTERY LATCH
Secure the cover by inserting
3
(6) torx screws. Do not over
tighten screws.
2
3
4
REAR SPEAKER