Heater Broil - Samsung NY58J9850WS Service Manual

Slide in gas ranges
Hide thumbs Also See for NY58J9850WS:
Table of Contents

Advertisement

3. Disassembly and Reassembly

3-24 HEATER BROIL

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to
do so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
1 .
Follow step on 3-1 .
2 .
Open the oven door and remove
the racks from inside the oven .
3 .
Disconnect the wires of the
HEATER BROIL .
4 .
Remove 2 screws of the
HEATER
HEATER BROIL from back side
BROIL
of the cavity .
5 .
Support the HEATER BROIL
with one hand, remove 2 screw
of the bracket HEATER BROIL .
6 .
Pull the HEATER BROIL .
7 .
Replace the HEATER BROIL .
This document can not be used without Samsung's authorization.
This document can not be used without Samsung's authorization.
Explanation
Explanation Photo
Heater Connector
5
5
52
4 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents