3. Disassembly and Reassembly
3-6 Removing Heater-Broil
WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Broil
Heater
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 25.
- Regulator Screw : M4 x 10 (STS, Machine)
- The others : M4 X 10.
This document can not be used without Samsung's authorization.
Explanation Photo
17
Explanation
1. Turn off the electrical supply going to the
range.
2. Open the oven door and remove the racks
from inside of the oven.
3. To remove the broil element.
a) Remove the Sensor-Thermistor and 4
screws from the front and rear brackets.
b) Remove Cover-Back Main Wire and
disconnect 2 wires from Heater-Broil and a
wire from Sensor-Thermistor.