3. Disassembly and Reassembly
3-12 SWITCH IGNITION
Parts
1 . Follow the steps on 3-1, 3-2,
and 3-3 .
2 . Place a finger behind each side
of the switch ignition and pull
it straight out to release it from
the control shaft . Repeat this
SWITCH
step to all switches .
IGNITION
3 . Disconnect the wires from the
connectors on the Cover Rear .
4 . Bend the Clamp to disconnect
the Switch Ignition Wire .
5 . Replace the Switch Ignition .
This document can not be used without Samsung's authorization.
This document can not be used without Samsung's authorization.
Explanation
Explanation Photo
Switch Ignition
2
2
Connector of
Switch Ignition
33
2
2
2