3. Disassembly and Reassembly
3-8 ELECTRODE
Parts
1 .
Follow the steps on 3-1 and 3-3 .
2 .
Disconnect the wire connectors
from the terminal on the Spark
module .
3 .
To remove the Electrode from
the cup, squeeze the two outside
ELECTRODE
edges of the clip under the
electrode together while pulling
to remove the locking clip . Slide
the electrode and the wire from
the cup . In case of Dual Burner,
Rotate Electrode and pull it up .
This document can not be used without Samsung's authorization.
This document can not be used without Samsung's authorization.
Explanation
Bracket Spring
Explanation Photo
Gas Orifice
Burner Cup
Electrode
Electrode
Wire Housing
25
Tube
Holder & Spring ETC