Control Panel - Gas Cooktop - Samsung NY58J9850WS Service Manual

2. Specifications

2-3 Control Panel - Gas Cooktop

LIGHTING A GAS SURFACE BURNER
Make sure all surface burners are positioned and assembled properly .
1 . Push in and turn the control knob to the LITE position . You will hear a "clicking" sound indicating the electronic ignition
system is working properly .
2. After the surface burner lights, turn the control knob to adjust the power setting of the surface burner and turn off the
electronic ignition system .
If the control knob is left in the Lite position, the electronic ignition system will continue to click and spark . It is not
recommended to operate any surface burner in the Lite position, since all electronic igniters spark at the same time .
GAS SURFACE BURNERS AND CONTROL KNOBS
Your gas range cooktop has five gas burners. All cooktop burners are open-port design to provide you the proper heat
source for the desired cooking job .
The 5,000 BTU burner provides precise cooking easy assembly, and accu-
rate and dependable operation. The different burner sizes ensure you have
cooking performance for delicate foods and foods that require low heat for
long cooking times . The 5,000 BTU burner allows the LO setting to be used
for a very low simmer setting .
The 9,500 BTU and 15,000 BTU round burners are general-purpose burn-
ers that can be used for most cooking . The HI to LO settings provide a wide
range of cooking temperatures to meet your cooking needs .
The 22,000 BTU burner provides maximum output . These burners can also be used as general-purpose
burners, but they are designed to provide quick heat to large cookware .
The 22,000 BTU burner spreads out the heat with a larger circle of flames.
This provides better heat distribution for larger cookware (12 in [30 .5 cm]) or larger pots and pans .
The 9,500 BTU center oval burner can also be used for large pots and pans, but is designed to
be used with the center burner grate and/or the center griddle accessory. The oval burner also
spreads out the heat more evenly over the large center cooking area .
Each surface burner has a control knob with settings from HI to LO . They also have a Lite set-
ting that is only used to light the flame.
The electronic ignition system sparks when the control knob is in the Lite position .
The surface burner indicator next to the control knob shows which burner the knob controls .
This document can not be used without Samsung's authorization. This document can not be used without Samsung's authorization.
10
5000
9500
BTU
BTU
9500
BTU
22,000 19,000
15,000
BTU
BTU