Samsung NY58J9850WS Service Manual page 64

4. Troubleshooting
Failure Display Codes
Safety error
"C-d0"
* Disconnect power .
* Take out the assy ITO glass from the assy
display PCB .
* Check whether between connector(CN201)
pin and pin on assy display PCB have a short
circuit .
* Make sure whether between FPCB pin and pin
on assy ITO glass have a short circuit .
* Replace the assy ITO glass and assy display PCB .
END
This document can not be used without Samsung's authorization. This document can not be used without Samsung's authorization.
Ok
Ok
Ok
64
Key Connector
(CN201)
Assy display PCB
FPCB
Assy ITO glass
* Repair the area of circuit having
short between connector(CN201)
No
pins on PCB .
* Repair the PCB circuitry or replace
the assy ITO glass .
No
* Replace the assy ITO glass
END
END