Switch-Door Plunger - Samsung NY58J9850WS Service Manual

3. Disassembly and Reassembly

3-16 SWITCH-DOOR PLUNGER

WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
1 . Turn off the electrical supply
going to the range .
2 . Shut off the gas shut-off valve in
the gas supply line to the range .
3 . Open the oven door .
4 . Carefully pull out the switch
door plunger switch from the
upper right corner of the cavity
front . Gently grasp the plunger
SWITCH-
with pliers and work from side
DOOR
to side while pulling . Pull out far
PLUNGER
enough to expose the wires .
5 . Note the location and mark the
wires; then disconnect the wire
to the switch door plunger .
6 . Replace with the switch-door
plunger, reconnect the wires
in their original positions, and
reinstall switch in the oven
frame .
This document can not be used without Samsung's authorization. This document can not be used without Samsung's authorization.
Explanation Explanation Photo
40
Switch Door
Plunger