Heater Convection - Samsung NY58J9850WS Service Manual

3. Disassembly and Reassembly

3-29 HEATER CONVECTION

WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
1 . Follow the step on 3-1 .
2 . To remove heater convection,
disconnect wires or connector going to
the heater-convection
3 . Remove 2 screws supporting the
heater-convection to the rear of the
HEATER
oven .
CONVECTION
4 . Remove 1 screw holding the bracket-
convection heater of the rear of the
oven .
5 . Pull out the heater convection .
6 . Reverse the order to install the heater
convection .
This document can not be used without Samsung's authorization. This document can not be used without Samsung's authorization.
Explanation
57
Explanation Photo
Connector of the
Heater Convection
4
Bracket Convection
Heater
3