Samsung NY58J9850WS Service Manual page 27

3. Disassembly and Reassembly
3-9 BURNER CUP
Parts
1 . Follow the steps on 3-1 and 3-3 .
2 . Using a tubing wrench on the
gas line fitting and a channel
lock wrench on the burner cup
base, firmly hold the cup base
in place while disconnecting the
gas line .
BURNER
3 . Remove a Electrode(p 25)
CUP
4 . The burner cup can be
removed . Replace it .
The new burner cup must be
replaced with the same size
as the one removed .
5 . After replacement, You must
check gas leakage
This document can not be used without Samsung's authorization. This document can not be used without Samsung's authorization.
Explanation Explanation Photo
Burner Cup
Bracket Spring
Electrode
Wire Housing
27
Tube
Electrode