Removing Heater-Broil - Samsung FER710DRS Service Manual

3. Disassembly and Reassembly

3-7 Removing Heater-Broil

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
CAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may
be present, and you can cut yourself if you are not careful.
Parts
Broil
* Reassembly of All part is the reverse order of disassembly.
Explanation Photo
15
Explanation
1. Turn off the electrical supply going to the
range.
2. Open the oven door and remove the racks
from inside the oven.
3. Pull oven from its installation and remove
the rear cover.
4. Disconnect the two wires to the broil
element.
5. Remove the four screws securing the broil
element to the oven cavity and remove
the broil element.