Design And Function; Transport And Installation; Protective Flap, Welding Machine Control - EWM tigSpeed continuous drive 45 hotwire Operating Instructions Manual
Wire feed unit
Hide thumbs
Also See for tigSpeed continuous drive 45 hotwire:
- Operating instructions manual (57 pages) ,
- Operating instructions manual (75 pages) ,
- Operating instructions manual (67 pages)
Table of Contents
Advertisement
Design and function
Transport and installation
Design and function
5
Risk of injury from electrical voltage!
Contact with live parts, e.g. power connections, can be fatal!
•
Observe the safety information on the first pages of the operating instructions!
•
Commissioning must be carried out by persons who are specifically trained in handling
power sources!
•
Connect connection or power cables while the machine is switched off!
Read and observe the documentation to all system and accessory components!
5.1
Transport and installation
Risk of accident due to improper transport of machines that must not be lifted!
Do not lift or suspend the machine! The machine can drop and cause injuries! The
handles, straps or brackets are suitable for transport by hand only!
•
The machine must not be suspended or lifted using a crane.
5.1.1
Protective flap, welding machine control
Item Symbol
1
2
3
•
Push the right-hand bracket of the protective cap to the right and remove the protective cap.
26
Description
0
Protective cap
Lid
Bracket, protective cap
WARNING
WARNING
Figure 5-1
099-000236-EW501
25.04.2019
Advertisement
Table of Contents
Need help?
Do you have a question about the tigSpeed continuous drive 45 hotwire and is the answer not in the manual?
Questions and answers