Raven SmarTrax Installation Manual page 18

Chapter 3
Tank Hose Installed
FIGURE 7.
Installed Tee
Fitting
Machine's Existing
Tank Hose
Install a -12 JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-109) on the end of the filter fitting.
3.
Connect the machine's tank hose to the opposite end of the installed tee fitting.
4.
Install a -12 JIC (F) to -6 JIC (M) reducer fitting (P/N 333-0012-101) on the 90° end of the installed tee
5.
fitting.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-901) on the installed reducer fitting.
6.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port T of the SmarTrax valve.
7.
14 Miller Atlas 3654 SmarTrax™ Installation Manual
Installed Hydraulic Hose
(P/N 214-1000-901)
Installed Reducer Fitting
(P/N 333-0012-101)