Raven SmarTrax Installation Manual page 20

Case ih patriot 4440, model year 2017 & newer - steering ready

Hide thumbs Also See for SmarTrax:

Table of Contents

FIGURE 13. Node Support Bracket Secured to Node Mounting Bracket

9. Position the node support bracket (P/N 107-0171-960) so that the hole aligns with the hole in the bottom node

mounting tab.

NOTE:

The mounting plate must be within +/- 2° of level to the wall for the SmarTrax system to operate

properly

10. Secure the node support bracket to the node mounting bracket by inserting a 5/16"-18 x 7/8" hex bolt (P/N

311-0052-104) through both brackets and installing one 5/16" zinc flanged lock nut (P/N 312-1001-169).

FIGURE 14. Node Support Bracket Secured to Cab Floor

11. Secure the node support bracket to the cab floor using one #10 x 3/4" self-tapping slotted hex head screw

(P/N 311-0001-321).

P/N 016-5032-041 Rev. A

CAB COMPONENT INSTALLATION

Table of Contents