Raven SmarTrax Installation Manual page 28

Chapter 5
Connect the large, rectangular connectors to the SmarTrax node.
7.
Node Connection
FIGURE 6.
Connect your receiver or source of DGPS to the connector labeled 'DGPS' on the node adapter cable.
8.
Connect the console providing machine guidance to the remaining DB- 9 connector.
9.
Connect the round plug to the vehicle's CANbus system (Viper Pro/Envizio Pro) or the DB-9 display cable
10.
(Cruizer).
CAN Connection
FIGURE 7.
Electrical hookup is recommended as shown in the Can Node Wiring Diagram on page 30.
11.
24
CAN Connection
CaseIH FLX 4010, 4020, 4510, and 4520 SmarTrax Installation Manual