Raven SmarTrax Installation Manual page 26

Chapter 5
To Install the Node:
The preferred node mounting location is on the lower right front corner of the seat frame.
1.
Preferred Node Mounting Location
FIGURE 3.
Drill Holes
Using the bracket (P/N 107-0171-954) as a template to mark and pre-drill 3/8" holes.
2.
Note:
When drilling the mounting holes, make sure not to interfere with the switch mounted behind the
frame. See Figure below. Top hole is approximately 1" back and 3/4" from top.
Mount the bracket using the supplied 5/16" bolts (P/N 311-0052-104) and nuts (P/N 312-1001-169).
3.
Optional Mounting Method - Using the mounting tabs on the node as a template, mark and pre-drill holes.
Using bolts or self tapping screws (not supplied), secure the node into position.
22 CaseIH FLX 4010, 4020, 4510, and 4520 SmarTrax Installation Manual