Table of Contents
Advertisement
1
Preparing the Installation
This section contains the following information:
■
■
■
■
■
1.1
Installation Tools
The following tools are required to install the radio system:
■
■
■
■
■
■
■
■
■
■
1.2
Unpacking and Checking the Equipment for
Completeness
To install a dual-radio system, you require the following equipment. This
equipment will usually be supplied in a mobile package like:
■
TM9456 Dual-Radio Installation and Programming Guide
© Tait Limited July 2016
Installation Tools
Unpacking and Checking the Equipment for Completeness
Hardware and Firmware Compatibility
Installation Considerations
Installation
Overview.
drill and drill bits
5mm (3/16 inch) flat-bladed screwdriver
Torx T-10 screwdriver
Torx T-20 screwdriver
Pozidriv screwdriver
8 mm (5/16 inch) socket
wire cutters/strippers
RF connector crimp tool
fuse crimp tool
in-line RF power meter capable of measuring forward and reflected
power at the operating frequency of each radio.
TM9456-ZPJ0-AAUG-2CLB-AP: P25 Trk 136-174M 50W 762-870M
35W BNC Mic U-Crdl R6m E-Spkr Enc
Preparing the Installation
13
Advertisement
Table of Contents
