Tait TM9456 Installation And Programming Manual page 35

2.8.6 Installing a Hand-Held Control Head
Figure 2.8
and a hand-held control head.
Figure 2.8
1.
2.
3.
TM9456 Dual-Radio Installation and Programming Guide
© Tait Limited July 2016
contains an overview of the connection between the radio bodies
Connecting radio bodies to hand-held control head
Body with link J4 removed
Outermost Innermost
port port
To radio
body with
Hand-held control head curly cord
link J4 fitted
Note:may include an extension such as the
T02-00009-0201
Notice If a radio body does not have link J4 removed, or you cannot
identify the correct radio body to use, you will need to disassemble one
or both interfaces. See
more information.
Attach the hand-held control head cord to the innermost port of the
radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
Install the cable grommet. See
Grommets" on page
Install the control head mounting clip in the most convenient
location for the radio user.
"Removing the Body Interface" on page 22
"Removing and Installing
17.
Installing a Dual-Radio System
Hand-held
control head
for
35