Preparing The Installation; Regulations; Installation Tools; Checking The Equipment For Completeness - Tait TM9100 Installation Manual

1

Preparing the Installation

This section contains the following information:
1.1

Regulations

TM9100 mobile radios should be installed in accordance with the MPT
MPT 1362 Code of
Practice
1362 Code of Practice.
Follow your vehicle manufacturer's instructions for installing mobile radios.
Vehicle
Manufacturer's
For more information, refer to the vehicle manufacturer's website or contact
Installation
the vehicle manufacturer's dealer.
Instructions
1.2

Installation Tools

The following tools are required to install of the radio:
1.3

Checking the Equipment for Completeness

Unpack the radio and check that you have the following:
1.
2.
3.
4.
TM9100 Installation Guide
© Tait Electronics Limited August 2005
regulations
installation tools
checking the equipment for completeness
choosing an installation configuration.
drill and drill bits
Pozidriv screwdriver
5/16 inch (8 mm) socket
RF connector crimp tool
fuse crimp tool
in-line RF power meter capable of measuring forward and reflected
power at the operating frequency of the radio.
TMAB34 radio body (40W/50W radio), or
TMAB32 radio body (25W radio)
TMAC41 control head (including control-head loom)
TMAA02-01 microphone, or TMAA02-08 keypad microphone
(including microphone clip and screws)
A TMAA03-17 installation kit (40W/50W radio), or
TMAA03-01 installation kit (25W radio), consisting of the
following items:
U-bracket
thumbscrews
Preparing the Installation 11