Table of Contents
Advertisement
3
Preparing the Installation
This section contains the following information to assist you in preparing for
the actual installation:
3.1
Regulations
TM9100 mobile radios should be installed in accordance with the MPT
MPT 1362 Code of
Practice
1362 Code of Practice.
Follow your vehicle manufacturer's guidelines for installing mobile radios.
Vehicle
Manufacturer's
For more information, contact the vehicle manufacturer's dealer or refer to
Installation
Guidelines
the vehicle manufacturer's website, for example, http://service.gm.com/
techlineinfo/radio.html (General Motors) or http://www.fordemc.com/
docs/download/Mobile_Radio_Guide.pdf (Ford).
3.2
Installation Tools
The following tools are required to install the radio:
3.3
Checking the Equipment for Completeness
Unpack the radio and check that you have the following:
Before installing, make sure that cable lengths are sufficient.
10
Preparing the Installation
regulations
installation tools
checking the equipment for completeness
programming settings
drill and drill bits
Pozidriv screwdriver
RF connector crimp tool
fuse crimp tool
in-line RF power meter capable of measuring forward and reflected
power at the operating frequency of the radio.
RF amplifier and radio body
Base plate
Cover
Control head (with fitting instructions)
Microphone
Remote cable
Install kit
TM9100 Mobiles: 110 W Mobile Installation Guide
© Tait Electronics Limited October 2005
Hide quick links:
Advertisement
Table of Contents
