Table of Contents
Advertisement
This chapter covers proper assembly of your implement.
Refer to the BH1020 Bridge Hitch Parts Manual F-777 for
complete part breakdowns and proper location of any
parts not shown in the following illustrations.
NOTE
Additional parts identification and location can be
obtained by reviewing the F-777 Parts Manual.
Do not work on or under this machine unless
securely
supported by a hoist or tractor or by
other sufficient means.
IMPORTANT
• If pre-assembled parts or fasteners are temporarily
removed, remember where they go. It is best to keep
the parts separated.
• Check that all working parts move freely, bolts are
tight and cotter pins are spread.
• Refer to the Torque Table for proper bolt torque
values. Note the different torque requirement for bolts
with lock nuts. See Page 4-1.
"Left" and "Right" refer to directions seen as if standing
behind the machine and facing in the direction of forward
travel.
WARNING
Chapter 2
Assembly
2-1
Advertisement
Table of Contents
