EZ-ACCESS Modular Ramp Assembly Manual page 2

ASSEMBLY MANUAL
For EZ-ACCESS
ATTENTION INSTALLER:

For residential use only!

850 lb. weight capacity

Read all instructions, including 'PERIODIC MAINTENANCE AND SAFETY,' prior to ramp
assembly

Please leave this ASSEMBLY MANUAL with the end user
ATTENTION END USER:

850 lb. weight capacity

Please read and become familiar with the 'PERIODIC MAINTENANCE AND SAFETY' section
of this manual

Fill out and return warranty registration
TOOLS TYPICALLY REQUIRED:
 1/2"
SOCKET OR
 9/16"
SOCKET OR
 5/16" (
DRILL BIT
 1/8"
DRILL BIT
 1/4"
MASONRY DRILL BIT
 5/32"
ALLEN WRENCH
 3/16"
ALLEN WRENCH
 #2
PHILLIPS HEAD SCREW DRIVER

BOX KNIFE
 25'
TAPE MEASURE

HAMMER

LEVEL

RUBBER MALLET

FILE

POWER DRILL
 (
HACKSAW FOR OPTIONAL HANDRAIL KITS

DIGGING TOOLS
-

TWO ABLE BODIED PERSONS NEEDED FOR INSTALLATION
VIEW PACKING LIST: Each ramp system is shipped with a packing list. Be sure to check that all
items and tools are present before starting installation.
®
Modular Ramp Systems
1/2"
WRENCH
9/16"
WRENCH
IF BRACE ASSEMBLIES ARE USED
(
USED WHEN INSTALLING TO CONCRETE PORCH
( )
INCLUDED
( )
INCLUDED
(
IF AN OBSTACLE NEEDS TO BE REMOVED
)
)
)
- 2 -
, , .)
STEP ETC