Indicators - Honeywell NOTIFIER ID61 Operating Manual

DISABLEMENT
POWER SUPPLY FAULT
TEST
DELAYS ACTIVE
FIRE OUTPUT: FAULT/ DISABLED
FIRE OUTPUT ACTIVE
SOUNDER: FAULT/ DISABLED
PLANT ALARM
POWER
FIRE CONTROL O/P: FAULT/ DISABLED
997-458-000-8, Issue 8
January 2010
ID61/62 Series Panel - Operating Manual

2.2 Indicators

The panel status indicators comprise three groups:
a. Zone Status LED indicators.
b. Panel/System LED indicators.
c. Visible/Audible indicators.
Zone Status LED Indicators
•
•
Panel/System LED Indicators
•
FIRE
•
FAULT
EARTH FAULT
SYSTEM FAULT
PRE-ALARM
1
2
Visible/Audible Indicators
•
•
ZONE FIRE - these LEDs indicate affected zone(s).
ZONE FAULT/DISABLE/TEST - these LEDs indicate
affected zone(s).
FIRE - these LEDs indicate a fire condition.
Other System Status LEDs:
FAULT indicates a fault has been
detected by the panel.
DISABLEMENT indicates the presence of a
m a n u a l l y - c o n f i g u r e d
disablement.
TEST indicates a test is in progress.
DELAY ACTIVE indicates delays are active.
FIRE OUTPUT ACTIVE indicates fire outputs have
been operated.
PRE-ALARM indicates
1
condition exists.
POWER indicates status of power
supply.
SYSTEM FAULT indicates the CPU has reset
or a system fault has occurred.
EARTH FAULT indicates an earth fault has
occurred.
PLANT ALARM indicates a fault or warning
2
from a plant-monitoring device.
FIRE CONTROL O/P: FAULT/DISABLED
indicates a fire control output
fault or disablement.
FIRE OUTPUT: FAULT/DISABLED
indicates a fire output fault or
disablement
SOUNDER: FAULT/DISABLED
indicates a sounder circuit
fault or disablement
POWER SUPPLY FAULT
indicates an unsatisfactory
power supply to the panel.
This LED is also configurable as SOUNDERS SILENCED.
This LED can be configured as: FAULT O/P: FAULT/
DISABLED.
Liquid Crystal Display (LCD) - (Section 4.1.1).
Internal Buzzer - (Section 4.1.2).
4
a pre-alarm