Buzzer - User Option; Keyboard - User Option - Honeywell NOTIFIER ID61 Operating Manual

ID61/62 Series Panel - Operating Manual
1
6
The standard function of the
control keys is suppressed
while this test is active.
Normal function resumes
upon test completion.
1
7

4.9.6 Buzzer - User Option

The Buzzer User Option, selected from the Test Menu,
tests the internal buzzer. Proceed as follows:
1 Using the numeric keypad, press '
TEST menu.
[U0] 1 : Test 2 : Disable/Enable
4 : View Mode
2 Press the ' /
2
screen options. To test the buzzer, press the '
button on the numeric keypad.
[U0 Test] 1:LEDs
4:Auto High Test 5:Outputs
[U0 Test] 6:Buzzer 7:Keyboard
3 The buzzer sounds with a 2:1 mark:space ratio and
the LCD flashes the message below. Press the '
button to cancel the test and return to the Test Menu.
TESTING BUZZER !

4.9.7 Keyboard - User Option

This option allows the panel keyboard to be functionally
tested.
1 Using the numeric keypad, press '
TEST menu.
[U0] 1 : Test 2 : Disable/Enable
4 : View Mode
2 Press the ' /
2
screen options. To test the keyboard, press the '
button on the numeric keypad.
[U0 Test] 6:Buzzer 7:Keyboard
3 The following screen is displayed.Press each panel
pushbutton in turn. When a pushbutton is pressed,
the corresponding display entry is replaced by an
equivalent number of asterisk (*) characters. The five
pushbuttons are represented by A to E, A being the
top button. Once all pushbuttons have been pressed
the display will return to the test menu. The keyboard
test will automatically abort after one minute if no key
is pressed.
Press ALL keys to exit . . .
0 . . 9 0 MENU 1 2 3 4 5 6 7 8 9 A B C D
27
' to display the
1
3 : Clock
5 : Commission 6:Print
' pushbuttons to display the next
8
2:LCD 3:Zones
: More
: More
' to display the
1
3 : Clock
5 : Commission 6:Print
' pushbuttons to display the next
8
: More
997-458-000-8, Issue 8
January 2010
'
6
'
4
'
7