Panel Controls And Indicators - Honeywell NOTIFIER ID2000 Series Operating Manual

STATUS: NORMAL STATUS: NORMAL
NOTIFIER ID2000 FIRE ALARM SYSTEM NOTIFIER ID2000 FIRE ALARM SYSTEM
MUTE MUTE
ACCEPT EVACUATE
BUZZER BUZZER
FIRE
ZONE FIRE ZONE FIRE
ZONE FAULT ZONE FAULT
FAULT
DISABLE/TEST DISABLE/TEST
DISABLEMENT
TEST
EARTH FAULT EARTH FAULT
POWER SUPPLY FAULT POWER SUPPLY FAULT
SYSTEM FAULT SYSTEM FAULT
POWER
ID2000 Series Operating Manual
2

Panel Controls and Indicators

FRI 09-JUL-04 14:48:40 FRI 09-JUL-04 14:48:40
SILENCE SILENCE RESOUND RESOUND
SOUNDERS SOUNDERS SOUNDERS SOUNDERS
3 4 5 6 7
1 2
PRE-ALARM
SOUNDERS DISABLED SOUNDERS DISABLED
SOUNDER FAULT SOUNDER FAULT
DELAY ACTIVE DELAY ACTIVE
DAY MODE DAY MODE
LCD display - refer to Section 4.1 for further information.
MUTE BUZZER - Refer to Section 4.2 for further information.
ACCEPT - Refer to Section 4.3 for further information.
EVACUATE - Refer to Section 4.4 for further information.
SILENCE SOUNDERS and RESOUND SOUNDERS - Refer
to Section 4.5 for futher information.
RESET - Refer to Section 4.6 for further information.
- Used to move around the LCD menus. Press
and hold to advance the printer paper (maximum of 20 lines
are advanced for a single press of this pushbutton).
- Used to confirm changes during system configuration.
0 to 9 - Used for menu selection and for data entry.
- Used to confirm an entry.
- Used to cancel an entry.
FIRE - LEDs indicate a fire condition.
ZONE FIRE - LEDs indicate affected zone(s).
FAULT - LEDs indicate a fault condition.
ZONE FAULT DISABLE/TEST - LEDs indicate affected zone(s).
Status LEDs:
DISABLEMENT
TEST
EARTH FAULT
POWER SUPPLY FAULT
SYSTEM FAULT
POWER
3
7
8
RESET
4
5
2
1
0
8 9 10 11 12 13 14 15
REMOTE OUTPUT DISABLED REMOTE OUTPUT DISABLED
REMOTE OUTPUT FAULT REMOTE OUTPUT FAULT
REMOTE OUTPUT OPERATED REMOTE OUTPUT OPERATED
ID2000 FIRE CONTROL PANEL ID2000 FIRE CONTROL PANEL
Complies With EN54-2/4 1997 Complies With EN54-2/4 1997
PRE-ALARM REMOTE OUTPUT DISABLED
SOUNDERS DISABLED REMOTE OUTPUT FAULT
SOUNDER FAULT REMOTE OUTPUT OPERATED
DELAY ACTIVE
DAY MODE
997-434-000-4, Issue 4
9
6
3
16
May 2010