Zones - User Option - Honeywell NOTIFIER ID61 Operating Manual

1
1 5
ZONE FIRE
1 2 3 4
ZONE FAULT
DISABLE/TEST
FIRE
DISABLEMENT
TEST
DELAYS ACTIVE
1 5
ZONE FIRE
2 3 4
1
ZONE FAULT
DISABLE/TEST
FIRE
DISABLEMENT
TEST
DELAYS ACTIVE
ID61/62 Series Panel - Operating Manual

4.10.1 Zones - User Option

This option allows the user to disable/enable a full zone
or part of a zone (selected devices). To perform this
operation:
1 Using the numeric keypad, press the '
to select the Disable/Enable Zones option.
[U0 Disable/Enable]
3:Day Mode
2 The LCD displays the Zones option, and prompts for
a zone number. Enter the zone number (one or two
digits entered via the numeric keypad). Press the '
pushbutton to confirm the zone number.
[Disable/Enable]
Enter Zone Number
3 The LCD then displays the current state of the zone
(Fully enabled, Fully disabled or Part disabled) and
prompts for selection of Full Zone or Devices in zone:
5
Note: Press the '
previous/next zone and confirm using the '
[Disable/Enable] Zone 0 1
1:Full Zone
4 To disable:
a. A Full Zone - Press the '
numeric keypad to select the Full Zone option, and
the '
[Disable/Enable] Zone 0 1
Press to Confirm
[Disable/Enable] Zone 0 1
1:Full Zone
The DISABLEMENT and relevant ZONE FAULT/
DISABLE/TEST LED(s) illuminate, indicating that the
selected zone(s) are now disabled. The LCD returns
to the Disable/Enable menu.
To enable a Full Zone:
[Disable/Enable] Zone 0 1
Press to Confirm
[Disable/Enable] Zone 0 1
1:Full Zone
The DISABLEMENT and relevant ZONE FAULT/
DISABLE/TEST LEDs extinguish (only when the panel
is returned to level 1 status).
29
1:Zone 2:Outputs
4:Delays
Zone _
/ ' pushbuttons to step to the
2 8
Fully enabled
2:Device in Zone
1
' pushbutton to confirm.
5
Disable fully ?
Fully disabled
2:Device in Zone
Enable fully ?
Fully enabled
2:Device in Zone
997-458-000-8, Issue 8
' pushbutton
1
'
5
< : Cancel
' button.
5
: More
' pushbutton on the
<:Cancel
: More
<:Cancel
: More
January 2010