Printing Quality Setting; General System Settings - Honeywell PC42d User Instructions

Appendix B - Default Settings
Medium Settings (continued)
Setting Description
Sets the printer's operation when it is being switched on:
Printer switch



Sets the printer's operation when it is being switched off:
Close printer cover




Printing quality setting

This section explains printing quality settings. To view such settings:

Printing quality setting
Setting Description
Sets the printer's label-printing speed. The unit of measurement is defined
Printing speed
based on "Measurement Unit" specification.
Sets the medium's image darkness. Use "Concentration" specifications to
Concentration
adjust this. The range is 1-100。

General system settings

This section explains general system settings. To view such settings:

User Instructions for PC42d Desktop Printer
No operation.
Paper feeding – Label is fed into the printer one at a time.
Paper-feeding test – The printer prints 2 configuration labels to
align medium sensor.
No operation.
Paper feeding – Label is fed into the printer one at a time.
Paper-feeding test – The printer prints 2 configuration labels to
align medium sensor.
On the printer web page click 'Configure' options > 'Printing' > 'Print Quality'.
On the printer web page click 'Configure' options > 'System Settings' >
'General'.
Default Value
No operation
No operation
Default Value
100
65
47