Print Quality Settings - Honeywell PM42 User Manual

Appendix B — Default Settings
Media Settings (continued)
Setting
Power Up Action
Head Down Action Sets the action when you close the print mechanism

Print Quality Settings

Print Quality Settings
Setting
Print Speed
Media Sensitivity
Darkness
Contrast
88
Description
Sets the action when you turn the printer on:
• No Action
• Formfeed - The printer feeds one label.
• Testfeed - The printer prints two configuration
labels as it calibrates the media sensors.
after opening it:
• No Action
• Formfeed - The printer feeds one label.
• Testfeed - The printer prints two configuration
labels as it calibrates the media sensors.
Configure print quality settings to control print speed, media sensitivity,
darkness, and contrast.
Description
Sets how fast the printer prints labels. The unit of
measure is defined in the Unit of Measure parameter.
Sets the level of sensitivity of the media to the printhead
heat for media and ribbon.
Sets the image darkness for media and ribbon. Adjust
this parameter with the Media Sensitivity parameter.
Range is 1 to 100.
Adjusts the blackness of the printing on the label in 2%
increments from -10% to +10%.
Default
No Action
No Action
PM42 Mid-Range Printer User Manual
Default
100
Variable
Variable
+0%