Chapter 7 Carrier Board Mechanical Design Guidelines; Som-Etx Mechanical Dimensions - Advantech SOM-ETX Series Design Manual

Chapter 7 Carrier Board Mechanical Design
Guidelines

7.1 SOM-ETX Mechanical Dimensions

Figure 7.1 shows the SOM-ETX carrier board mechanical dimensions. The unit is
millimeter.
Figure 7-1 SOM-ETX Carrier Board Mechanical Dimensions
The connector height on SOM-ETX was 3mm. when we design the carrier board, we
must notice the area behind the SOM-ETX modules. No component on this area is
needed. The other special solution is 4mm, so that we have the 1mm space between
SOM-ETX modules and carrier board, if you need 4mm solution, please contact
Advantech.
Table 7.1 connector types
FX8-100P-SV:
FX8-100P-SV1:
118
Advantech SOM-ETX Design Guide
3 mm (Advantech Standard)
4 mm (Special Case)
Chapter 7 Carrier Board Mechanical Design