1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. SIMB-982
  6. User manual

Advantech SIMB-982 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
SIMB-982
Intel® Core™ i7/i5/i3 LGA1151, H110/
Q170, ATX with DVI-D/HDMI/DP/VGA,
DDR4 , PCIe Gen3x16, Multiple LANs,
10 COM, SATA III, USB 3.0, USB2.0

Advertisement

Table of Contents
loading

Related Manuals for Advantech SIMB-982

Summary of Contents for Advantech SIMB-982

  • Page 1 User Manual SIMB-982 Intel® Core™ i7/i5/i3 LGA1151, H110/ Q170, ATX with DVI-D/HDMI/DP/VGA, DDR4 , PCIe Gen3x16, Multiple LANs, 10 COM, SATA III, USB 3.0, USB2.0...
  • Page 2 Chapter General Information...

  • Page 3: Specifications

    Rich I/O connectivity: 10 x serial ports, 4(H110)/6(Q170) x USB 3.0,  5(H110)/7(Q170) xUSB 2.0, 4(H110)/8(Q170) x SATA3.0, 2(H110)/3(Q170) LAN Standard ATX form factor with industrial feature: The SIMB-982 is a full-  featured ATX motherboard with balanced expandability and performance Wide selection of storage devices: SATA HDD, M.2, customers benefit...

  • Page 4: Ethernet Lan

    Humidity: 5 ~ 95% non-condensing  Power supply voltage: ATX power supply (12V / 5V / 3.3V /5VSB)  Power consumption:  Board size: 304 mm x 244 mm (12" x 9.6")  Board weight: 0.8 kg  SIMB-982 User Manual...

  • Page 5: Jumpers And Connectors

    Jumpers and Connectors Connectors on the SIMB-982 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers.
  • Page 6 Table 1.2: Jumper List Label Function JCOM1PWR COM1_RI# Pin RI#/5V/12V selection JCOM1MODE COM1 RS-232/422/485 selection JCOM1TERM1 Enable/Disable COM1 term selection JCOM2PWR COM2_RI# Pin RI#/5V/12V selection JPSON1 AT/ATX Mode selection JCMOS1 CMOS clean selection JWDT1+JOBS1 Watchdog reset and OBS alarm selection SIMB-982 User Manual...
  • Page 7 1.5.1 Board layout: Jumper and Connector Locations (SIMB-982H H110 SKU) SIMB-982 User Manual...
  • Page 8 1.5.2 Board layout: Jumper and Connector Locations (SIMB-982Q Q170 SKU) SIMB-982 User Manual...
  • Page 9 1 M.2 slot (M-key) PCIex4 USB2.0 1 F/S Mini Card 2nd Super PCIex1 IO Fintek 4 RS-232 F81216AD 1 PCIex1 slot TPM IC Audio Module HD Audio interface 5 RS-232 NuvoTon 1 RS-232/422/485 NCT6106D 8 bit GPIO SIMB-982 User Manual...

  • Page 10: Safety Precautions

    Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer’s instructions. SIMB-982 User Manual...

  • Page 11: Jumper Settings

    1.8.2 CMOS Clear (JCMOS1) The SIMB-982 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed.
  • Page 12 Function Setting Set COM_RI# as RI# (Default) Set COM_RI# as 5V Set COM_RI# as 12V 1.8.4 COM1 terminal enable/disable selection (JCOM1TERM1) Table 1.5: COM terminal enable/disable selection (JCOM1TERM1) Function Setting COM1 terminal Enable (Default) COM1 terminal Disable SIMB-982 User Manual...

  • Page 13: Atx/At Mode Selection (Jpson1)

    Set COM1 as RS-232 (Default) Set COM1 as RS-485 half duplex Set COM1 as RS-485/422 full duplex 1.8.6 ATX/AT Mode Selection (JPSON1) Table 1.7: ATX/AT Mode Selection (JPSON1) Function Jumper Setting AT Mode 1-2 closed ATX Mode (Default) 2-3 closed SIMB-982 User Manual...

  • Page 14: Watchdog Timer Output (Jwdt1)

    1.8.7 Watchdog timer output (JWDT1) The SIMB-982 contains a watchdog timer that will reset the CPU. This feature means the SIMB-982 will recover from a software failure or an EMI problem. The JWDT1 jumper settings control the outcome of what the computer will do in the event the watchdog timer is tripped.

  • Page 15: System Memory

    System Memory SIMB-982 has two 288-pin memory sockets for DDR4 1866/2133 MHz memory mod- ules with maximum capacity of 32 GB (Maximum 16 GB for each DIMM). SIMB-982 only supports non-ECC DDR4 memory modules. Please note that SIMB-982 does NOT support registered DIMMs (RDIMMs).
  • Page 16 SIMB-982 User Manual...
  • Page 17 Chapter Connecting Peripherals...

  • Page 18: Usb Ports

    USB Ports (LAN12/LAN3_USB910/USB3_1234 /USB3_56/USB1112/USB1314) SIMB-982 provides up to nine USB ports for H110 sku and thirteen USB ports for Q170 Sku. The USB interface complies with USB Specifi-cation Rev. 2.0 and Rev. 3.0 supporting transmission rates up to 625 Mbps and is fuse protected. The USB interface can be disabled in the system BIOS setup.

  • Page 19: Vga Connector (Vga1)

    VGA connector (VGA1) SIMB-982 includes VGA interfaces that can drive conventional VGA displays. VGA is a standard 15-pin D-SUB connector commonly used for VGA. SIMB-982 User Manual...
  • Page 20 COM1 COM7~10 DVI-D1 SIMB-982 includes COM and DVI interfaces that can drive conventional COM and DVI-D displays. COM2 is a standard 9-pin connector support RS-232. Pin assignments for COM2 and DVI connectors are detailed in Appendix A. SIMB-982 supports 10 serial ports. COM1 supports RS-232/422/485 function and RI/12V/5V switching by jumper selection.
  • Page 21 (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 180 W. CPU Fan Header (CPUFAN1) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. SIMB-982 User Manual...
  • Page 22 System FAN Headers (SYSFAN1/SYSFAN2) If a fan is used, this connector supports cooling fans of 500 mA (6W) or less. SIMB-982 User Manual...

  • Page 23: Power Led And Keyboard Lock (Jfp3)

    Front Panel Headers (JFP1, JFP2 & JFP3) There are several external switches and LEDs to monitor and control the SIMB-982 2.8.1 Power LED and Keyboard Lock (JFP3) JFP3 is a 5-pin connector for the power LED and keyboard lock. Refer to Appendix A for detailed information on the pin assignments.
  • Page 24 Display Port (DP1) 2.10 HDMI Connector (HDMI1) SIMB-982 User Manual...
  • Page 25 2.11 SATA Signal Connector (SATA1 ~ SATA8) SIMB-982 features a high performance Serial ATA III & II interface (up to 600 MB/s & 300 MB/s) which eases hard drive cabling with thin, space-saving cables. 2.12 HD Analog Audio Interface (AUDIO1, FP_AUDIO1) Front headphone connector (FP_AUDIO1) is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 (optional) audio standard.
  • Page 26 PCI-E x1 Slot (PCIE_SLOT2 / PCIE_SLOT4) PCI-E x4 Slot (PCIE_SLOT3) SIMB-982 provides a PCIe x16 slot and PCIe x4 and PCIe x1 slot for users to install add-on cards when their applications require higher graphic performance than the CPU embedded graphics controller can provide.
  • Page 27 2.14 M.2 Connector (NGFF1) 2.15 Mini_PCIe Connector (MPCIE_CARD1) SIMB-982 User Manual...
  • Page 28 2.16 PCI Slot (PCI1 / PCI2 / PCI3) 2.17 Speaker audio interface pin header (JAMP1) SIMB-982 User Manual...
  • Page 29 2.18 SMBus Pin Header (SMBUS1) 2.19 General Purpose I/O Pin Header (GPIO1) SIMB-982 User Manual...
  • Page 30 2.20 SPDIF Pin Header (SPDIF_1) 2.21 Low Pin Count Header (JLPC1) SIMB-982 User Manual...
  • Page 31 2.22 Case-Open Detect Connector (JCASE1) 2.23 Keyboard Mouse Header (KBMS1) SIMB-982 User Manual...
  • Page 32 Voltage Display Box Header (VOLT1) VOLT1 connects to the alarm board on the chassis. These alarm boards give warn- ings if a power supply or fan fails, or if the chassis overheats. 2.25 LAN LED Headers (LANLED12 / LANLED3) SIMB-982 User Manual...
  • Page 33 2.26 SPI Programming Header (SPI_CN1) 2.27 External SATA LED Header (EXT_SATA_LED) SIMB-982 User Manual...
  • Page 34 2.28 LGA1155 CPU Socket (CPU1) 2.29 DDR4 DIMM Socket (DIMMA1 / DIMMA2 / DIMMB1 / DIMMB2) SIMB-982 User Manual...
  • Page 35 2.30 COM1_RI# Pin RI#/5V/12V Selection (JCOM1PWR) 2.31 COM1 RS-232/422/485 Selection (JCOM1MODE) SIMB-982 User Manual...
  • Page 36 2.32 Enable/Disable COM1 term Selection (JCOM1TERM1) 2.33 COM2_RI# Pin RI#/5V/12V Selection (JCOM2PWR) SIMB-982 User Manual...
  • Page 37 2.34 AT/ATX Mode Selection (JPSON1) 2.35 CMOS Clean Selection (JCMOS1) SIMB-982 User Manual...
  • Page 38 2.36 Watchdog Reset and OBS alarm Selection (JWDT1+JOBS1) SIMB-982 User Manual...
  • Page 39 Appendix I/O Pin Assignments...
  • Page 40 BLUE RED GND GREEN GND BLUE GND SGND HSYNC VSYNC TMDS DATA2- TMDS DATA2+ TMDS DATA 2/4 Shield DDC clock DDC data TMDS DATA1- TMDS DATA1+ TMDS DATA 1/3 Shield Hot Plug Detect TMDS DATA0- TMDS DATA0+ SIMB-982 User Manual...

  • Page 41: Hdmi Connector (Hdmi1)

    TMDS Clock Shield TMDS Clock- Reserved DDC/CEC/HEC Ground +5 V Power (max 50 mA) Hot Plug Detect DisplayPort connector (DP1) Signal Signal ML_LANE0+ ML_LANE0- ML_LANE1+ ML_LANE1- ML_LANE2+ ML_LANE2- ML_LANE3+ ML_LANE3- Config 1 AUX_CH+ AUX_CH- Hot Plug Detect +3.3V SIMB-982 User Manual...

  • Page 42: Com2 Connector (Com2)

    LAN Connector (LAN12) Signal Signal L2_MDI_0+ L2_MDI_0- L2_MDI_1+ L2_MDI_1- L2_MDI_2+ L2_MDI_2- L2_MDI_3+ L2_MDI_3- L1_MDI_0+ L1_MDI_0- L1_MDI_1+ L1_MDI_1- L1_MDI_2+ L1_MDI_2- L1_MDI_3+ L1_MDI_3- COM2 Connector (COM2) Signal Signal DCD# DSR# RTS# CTS# DTR# SIMB-982 User Manual...
  • Page 43 DVI-D Connector (DVI-D1) Signal Signal TMDS D2- TMDS D2+ VCC (+5V) Hot plug detect TMDS D0- DDC CLK TMDS D0+ DDC DAT TMDS D1- TMDS D1+ TMDS CLK+ TMDS CLK- SIMB-982 User Manual...
  • Page 44 RJ45+USB2.0 Stack Connector (LAN3_USB910 (for Q170)) (USB910 (for H110)) Signal Signal MDI_0+ MDI_0- MDI_1+ MDI_1- MDI_2+ MDI_2- MDI_3+ MDI_3- RX0- RX0+ TX0- TX0+ RX1- RX1+ TX1- TX1+ SIMB-982 User Manual...
  • Page 45 D+_1 D+_2 RX-_1 RX-_2 RX+_1 RX+_2 TX-_1 TX-_2 TX+_1 TX+_2 VBUS VBUS D-_3 D-_4 D+_3 D+_4 RX-_3 RX-_4 RX+_3 RX+_4 TX-_3 TX-_4 TX+_3 TX+_4 HD Analog Audio Interface Connector (AUDIO1) Signal MIC IN LINE OUT LINE IN SIMB-982 User Manual...

  • Page 46: Case-Open Pin Header (Jcase1)

    Case-Open Pin Header (JCASE1) Signal CASEOP A.11 SPDIF Audio Pin Header (SPDIF_1) Signal SPDIF OUT A.12 Front Panel Audio Pin Header (FP_AUDIO1) Signal MIC IN-L MIC IN-R FPAUD_DETECT# LINE OUT-R SENSE R1 SENSE LINE OUT-L SENSE R2 SIMB-982 User Manual...

  • Page 47: Audio Amplifier Output Pin Header (Jamp1)

    A.13 Audio Amplifier Output Pin Header (JAMP1) Signal AMP_L- AMP_L+ AMP_R- AMP_R+ SIMB-982 User Manual...
  • Page 48 Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ Reserved RX0- TX1+ CONFIG1 TX1- RX1+ RX1- TX2+ TX2- RX2+ RX2- TX3+ TX3- RX3+ Reserved RX3- Reserved CONFIG2 TX4+ Reserved TX4- RX4+ SIMB-982 User Manual...
  • Page 49 Reserved RX7- TX8+ Reserved TX8- RX8+ RX8- TX9+ TX9- RX9+ RX9- TX10+ TX10- RX10+ RX10- TX11+ TX11- RX11+ RX11- TX12+ TX12- RX12+ RX12- TX13+ TX13- RX13+ RX13- TX14+ TX14- RX14+ RX14- TX15+ TX15- RX15+ Reserved RX15- Reserved SIMB-982 User Manual...
  • Page 50 A.15 USB2.0 Type-A Connector (USB7) Signal A.16 Dual Port USB2.0 Pin Header (USB1112 / USB1314 for Q170)) Signal Signal SIMB-982 User Manual...
  • Page 51 Dual Port USB3.0 Box Header_Q170 (USB3_56) Signal Signal VBUS D+_6 RX-_5 D-_6 RX+_5 TX+_6 TX-_5 TX-_6 TX+_5 RX+_6 D-_5 RX-_6 VBUS *) D+_5 Dual Port USB2.0 Box Header_H110 (USB3_56) Signal Signal VBUS D+_6 D-_6 D-_5 VBUS (*) D+_5 SIMB-982 User Manual...
  • Page 52 A.18 Serial ATA Interface Connector (SATA1/SATA2/SATA3/SATA4 (for H110/Q170) /SATA5/SATA6/SATA7/SATA8 (for Q170)) Signal A.19 COM1 Box Header (COM1) Signal Signal DCD# DSR# RTS# CTS# DTR# SIMB-982 User Manual...
  • Page 53 CTS# [B] DTR# [B] RI# [B] DCD# [C] DSR# [C] RXD [C] RTS# [C] TXD [C] CTS# [C] DTR# [C] RI# [C] DCD# [D] DSR# [D] RXD [D] RTS# [D] TXD [D] CTS# [D] DTR# [D] RI# [D] SIMB-982 User Manual...

  • Page 54: 8-Bits General Purpose Io Pin Header (Gpio1)

    A.21 8-bits General Purpose IO Pin Header (GPIO1) Signal Signal GPIO0 GPIO4 GPIO1 GPIO5 GPIO2 GPIO6 GPIO3 GPIO7 SIMB-982 User Manual...
  • Page 55 Reserved +1.5V CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved DISABLE# DETECT# RESET# PCIE_RX+ +3.3V PCIE_RX- +1.5V SMB_CLK PCIE_TX- SMB_DATA PCIE_TX+ USB_D- USB_D+ +3.3V +3.3V Reserved V1.2_DETECT# Reserved Reserved Reserved Reserved +1.5V Reserved Reserved +3.3V SIMB-982 User Manual...
  • Page 56 PETp0 or N/C CLKREQ# (I/O)(0/ 3.3V) or N/C PEWAKE# (I/O)(0/ REFCLKn 3.3V) or N/C REFCLKp Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key Connector Key SUSCLK(32kHz) (O)(0/3.3V) PEDET 3.3V 3.3V 3.3V SIMB-982 User Manual...
  • Page 57 A.24 CPU FAN Header (CPUFAN1) Signal CPU FAN VCC CPU FAN SPEED CPU FAN PWM A.25 SYSTEM FAN Header (SYSFAN1 / SYSFAN2) Signal SYS FAN VCC SYS FAN SPEED SYS FAN PWM SIMB-982 User Manual...
  • Page 58 LPC Header (JLPC1) Signal Signal CLK (24MHz) RESET# FRAME# +3.3V SMB CLK SERIRQ SMB DAT +5VSB A.27 Keyboard Mouse Header (KBMS1) Signal KB_CLK# KB_DAT# MS_CLK# VCC (+5VSB) MS_DAT# A.28 SMBUS Pin Header (SMBUS1) Signal +5VSB SMB LK SMB AT SIMB-982 User Manual...
  • Page 59 Voltage Display Box Header (VOLT1) Signal Signal +5V_STBY +3.3 V +12 V A.30 LAN12 LED Header (LANLED12) Signal Signal LAN1_LED0_ACT# LAN2_LED0_ACT# +3.3V +3.3V LAN1_LED1_1G# LAN2_LED1_1G# LAN1_LED2_100M# LAN2_LED2_100M# +3.3V A.31 LAN3 LED Header (LANLED3) Signal LAN3_LED0_ACT# +3.3V LAN3_LED1_1G# LAN3_LED2_100M# +3.3V SIMB-982 User Manual...
  • Page 60 A.32 SPI Programming Header (SPI_CN1) Signal Signal +3.3V SCLK MISO MOSI A.33 External SATA LED Header (EXT_SATA_LED) Signal Signal EXT_SATA_LED1 EXT_SATA_LED2 EXT_SATA_LED3 EXT_SATA_LED4 SIMB-982 User Manual...
  • Page 61 A.34 ATX 24pin Main Power for System Connector (ATXPWR1) Signal Signal +3.3V +3.3V +3.3V -12V PSON# PWROK +5VSB +12V +12V +3.3V A.35 ATX 8pin Main Power for CPU Connector (ATXPWR_12V1) Signal 12V_IN 12V_IN 12V_IN 12V_IN SIMB-982 User Manual...
  • Page 62 / HDD LED / SM bus Header (JFP1+JFP2) Signal Signal HDD LED+ Power Button+ SPK_P2 HDD LED- Power Button- SPK_P3 SMB_DATA System Reset+ SPK_P4 SMB_CLK System Reset- A.37 Keyboard Lock and Power LED Header (JFP3) Signal LED Power Keyboard Lock SIMB-982 User Manual...
  • Page 63 A.38 COM1_RI# Pin RI#/5V/12V Selection (JCOM1PWR) Signal Signal RI1xPOWERxJMP +12V RI1xPOWERxJMP COM1_RI# RI1xPOWERxJMP A.39 COM1 RS-232/422/485 Selection (JCOM1MODE) Signal Signal COM1_MODE_0 COM1_MODE_1 A.40 Enable/Disable COM1 term Selection (JCOM1TERM1) Signal TERM SIMB-982 User Manual...
  • Page 64 A.41 COM2_RI# Pin RI#/5V/12V Selection(JCOM2PWR) Signal Signal RI2xPOWERxJMP +12V RI2xPOWERxJMP COM2_RI# RI2xPOWERxJMP A.42 AT/ATX Mode Selection (JPSON1) Signal +3.3V A.43 CMOS Clean Selection (JCMOS1) Signal RTC Reset SIMB-982 User Manual...
  • Page 65 A.44 Watchdog Reset and OBS Alarm Selection (JWDT1+JOBS1) Signal Signal Watch Dog Reset# output IRRX System Reset input# SIO Warning Beep output IRTX SP1 Buzzer Beep input SIMB-982 User Manual...
  • Page 66 SIMB-982 User Manual...
  • Page 67 SIMB-982 User Manual...
  • Page 68 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2014...

Table of Contents