Cleaning The Tool; Filling The Chain Oil Reservoir - pellenc SELION M12 Operating Instructions Manual

6.11. CLEANING THE TOOL

Keep the tool clean by cleaning it frequently using a damp
cloth and compressed air.
Pay particular attention to the parts in contact with the
wood (chain (6), chain guide (7)).
Warning
Never use solvents (trichloroethylene, white spirit, petrol, etc.) to clean the tool.
Set the battery switch to "0" and disconnect the connector.

6.12. FILLING THE CHAIN OIL RESERVOIR

• The oil reservoir must be kept clean.
• Clean the cap and the filling area before removing the cap.
• Do not allow the oil to overflow from the reservoir; wipe off any excess oil.
Warning
The oil reservoir is equipped with a strainer. If the oil does not reach the saw head, return
the tool to your authorized distributor so that he can clean the strainer.
34
CHAINSAW SELION M12
51_149238-A