pellenc SELION M12 Operating Instructions Manual page 27

• prior to each use.
• frequently
Caution
Before working on the tool, check that
the On / Off switch is in the off position
«0» and disconnect the battery power
lead.
1. Loosen the chain guard (8) lock nut by 3 turns.
2. Tighten the chain guard lock nut (8) correctly using
the telescopic wrench (11), the chain guide (7) then
moves forward and automatically tensions the chain
(6).
3. Re- position the handle of the telescopic wrench (11)
on its holding magnet.
CHAINSAW SELION M12
51_149238-A
27