Checking the tension of the chain
Important
Adjust the tension as often as necessary. Check
the tension by pulling the chain in the middle of the
guide: 1 to 3 drive links should appear.
6.5. CHAIN LUBRICATION
6.5.1. FILLING THE CHAIN OIL RESERVOIR
Before the first use, it is essential to fill the chain oil reser-
voir with the specific chain and guide oil (Ref.: 116688)
1.
Unscrew the guide and chain oil reservoir cap (9)
2.
Carefully pour the guide and chain oil into the reser-
voir.
3.
Tighten the chain oil tank cap (9)
Important
Check the oil level every hour and top it up if nec-
essary.
Note
PELLENC recommends using a biodegradable chain oil that complies with the RAL-UZ-48 standard (ref.
116688, otherwise any oil that complies with the RAL-UZ-48 standard)
Consumables sold separately.
Warning
Never use dirty or used oil.
28
CHAINSAW SELION M12
51_149238-A