Operation Panel - Toshiba B-SX600 SERIES Product Description

1. OUTLINE
1.4

OPERATION PANEL

The Operation Panel is equipped with the LCD Message Display, which is used to indicate the state of the
printer, 4 LED's, and 9 keys. Please see the table below for details.
[PAUSE] Key
Cursor Keys
(◄ ► ▲ ▼)
Name
LCD Message Display
Power LED
Ready LED
Error LED
Data LED
[Pause] key
[Feed] key
[Menu] key
◄key
►key
▲key
▼key
[Enter] key
[Cancel] key
Power Ready Error
Power LED
Ready LED
Enter
[Enter] Key
Shows the menu or error information.
Illuminates in green when the printer is turned on.
Illuminates in green when the printer is ready, and goes out when the printer is in
a pause state or while the menu is being displayed.
Illuminates in red when an error occurs, and flashes in red in the event of a
warning.
Flashes in green when data is received, and illuminates in green when data is in
the receive buffer.
Used to place the printer in a pause or ready state.
Used to feed the media for a single page or label length.
Used to display the menu when the printer is in a ready or pause state. When
held down, the [Menu] key will be locked, and when held down again, it will be
unlocked.
Used to choose an item on the left while the menu is being displayed.
Used to choose an item on the right while the menu is being displayed.
Used to choose an item above while the menu is being displayed.
Used to choose an item below while the menu is being displayed.
When the model with the Cutter Unit is used, holding down this key in a ready or
pause state causes the media to be cut.
Used to determine the settings while the menu is being displayed.
Used to clear an error when it occurs.
When held down, print data is cleared.
Ready
No. 00000
Data
Feed
Pause
Menu
Cancel
Functions (Purposes)
1-5
1.4 OPERATION PANEL
LCD Message Display
Data LED
Error LED
[Feed] Key
[Menu] Key
[Cancel] Key
EO10-33021